HARDWARE & ACCESSORIES
Tapcon System
Panemate Pro 1/4" x 2-1/4"
Bonded Neoprene Washer
Washered Wing Nut
End Cap
For Installation you will need:
Drill Bit 3/16" Masonry (for hollow block*)
Drill Bit 3/16" standard (for wood)
Drill Bit 7/32" (for solid concrete**)
Tapcon SG Driver 3/16"
Wingnut driver
* The sides of an opening are typically hollow block.
** The top and bottom of an opening are typically solid concrete.
Flush Mount System
Female Panelmate Insert - available in 2 lengths
Sidewalk Bolt
Bonded Neoprene Washer
Nylon Screw in end cap
For Installation you will need:
Drill Bit 7/16"
Driver
8' H Panel Connector
Connect 2 Storm-Busters Clearview panels without using any hardware.
(When using the panel connector anchor spacing should 10" on center)